BendPak 2 Post Lift: How to Buy One From Us (Call/Email for a Quote)

If you are looking for a BendPak 2 post lift, this page tells you exactly how buying one from us works, what BendPak models we quote most often, and how the price shakes out once you decide whether you want the lift by itself, delivered, or fully installed. The short version: BendPak is a solid, safe brand, but they are not the lifts we stock on the sales floor. We source them by quote, so the fastest thing you can do is call or email and we will price out your exact model with the options you need.

Why we do BendPak by quote instead of listing them

The lifts we stock and list openly on our store are the ones our install crews run every week and can service without hesitation: Rotary, Forward, and Challenger. Those are our top picks and what we point most buyers toward. BendPak is a real name in the industry, ALI-certified, and safe to own. It just is not our number-one recommendation, so we do not tie up floor space keeping them on hand. If you have already decided a BendPak 2 post lift is what you want, we can absolutely bring one in for you. We just build the quote on demand so you get exactly the model, height, and swing-arm setup you asked for.

Popular BendPak 2 post lift models we quote

These are the BendPak two-post lifts we get asked about most often. If you already know the model, mention it when you call and we will price it directly. If you are still deciding, tell us what you plan to lift and we will point you at the right one.

• BendPak XPR-10AS – 10,000 lb symmetric, popular home garage and small-shop pick. Good for cars and light trucks that will center between the columns.
• BendPak XPR-10S – 10,000 lb asymmetric. Same capacity as the -10AS but the columns rotate so bigger vehicles clear the doors easier.
• BendPak XPR-12CL – 12,000 lb clearfloor. No overhead bar between columns, best for shops that want unrestricted vehicle height under the lift.
• BendPak XPR-15CL – 15,000 lb clearfloor. Steps up for heavier trucks and vans.
• BendPak HDS-14LSX / HDS-14X – 14,000 lb heavy-duty two-post lift. Wider chassis than the XPR line, used in truck and fleet shops.
• BendPak HDS-18E / HDS-27 – 18,000 lb and 27,000 lb heavy-duty two-post lifts. These are the ones we quote for medium-duty truck and larger commercial vehicle work.

All of the above are BendPak factory models. If you saw a model number somewhere else that is not on this list, send it over and we will confirm it is a real current BendPak two-post lift and price it.

How our BendPak 2 post lift pricing works

We build every BendPak 2 post lift quote in three lines so you can see what each piece costs and pick what you want:

1. Equipment only – the lift itself, freight-shipped straight from the manufacturer to your address on a pallet. This is the lowest price on the sheet. If you have equipment to unload and a crew that has done a lift install before, this is often what you actually need.
2. Equipment + local delivery – we add a delivery line if you want it dropped in your bay instead of curbside on a freight pallet. Local delivery is a flat charge inside our home area; longer hauls quote based on distance.
3. Equipment + local delivery + install – the full turnkey number. Our crew arrives with the lift, sets it, anchors it, plumbs it, wires it, tests it under load, and hands it over ready to work. This line is for shops that just want the lift working when we leave.

You can also mix and match. Some buyers want equipment plus install but they have a friend with a lift-truck who can move the pallet – fine, we skip the delivery line. Some want the lift delivered but plan to install with their own guys – fine, we skip the install line. Tell us what you need on the call and we will price only what you asked for.

What our install adds

If you take the install line on a BendPak 2 post lift, here is what actually happens on the day. Our crew arrives, uncrates, and stages the components. We verify your slab thickness and floor condition, mark and drill the anchor holes to the pattern the manufacturer specifies, set both columns, level, plumb, and torque them, run the hydraulic lines, pull power to the motor, and cycle the lift multiple times under load to bleed the system and confirm the safety locks catch on both sides. We do not leave the site until the lift lifts, holds, and lowers exactly the way it should. The install line also includes a walk-through with whoever is going to be running the lift – how the locks work, how the safety releases work, and what the daily and monthly maintenance looks like.

What our local delivery zone looks like

Local delivery from us means our own trucks and our own crew, not a common carrier. That is why the pricing is different from freight – you get a scheduled window, we call before we arrive, and the pallet comes off the truck where you tell us to put it. Our local delivery zone covers most of central Iowa. If you are outside the zone we can still deliver, we just work up a fair per-mile line on the quote. For long-haul buyers, freight direct from the BendPak factory to your door is usually the smart move.

Honest framing: BendPak vs. what we do stock

A BendPak 2 post lift is a fine lift. It will lift the vehicle safely and, taken care of, will last a long working life. It is ALI-certified in most of its 2-post models, which means it went through the third-party safety audit that the industry uses. So this is not a we-cannot-sell-you-that situation – if BendPak is what you want, we will get you a good one.

That said, our first recommendation on a symmetric or asymmetric 2-post is usually a Rotary or a Forward. Those are the brands our install techs know cold, whose parts we stock, and whose warranty claims we have run through many times. If you want the fastest service and the deepest parts backup, one of those is going to serve you better over the ten-plus years you own the lift. That is why we lead with them – it is not that BendPak is bad, it is that we are more accountable on the brands we live with every day.

Warranty, service, and parts on a BendPak 2 post lift bought from us

BendPak warranties the lift directly. Their two-post lift warranty covers the structural components long-term and the mechanical components for a shorter period, per the exact model. When you buy from us we help you file if anything ever goes wrong – we do not disappear once the invoice is paid. On the parts side, if your BendPak lift ever needs replacement equalizer cables, lock ladders, hydraulic hoses, cylinder seals, or anything else, we can source those too. It is worth knowing that BendPak parts availability is generally good but sometimes runs longer lead times than the brands we stock in depth, which is another practical reason we point most buyers at Rotary or Forward. But if you are running a BendPak lift already or you have made up your mind to buy one, we are absolutely the right shop to keep it maintained.

Common questions we get on the BendPak quote call

How long does the quote take? Same day if you catch us during business hours. We do not do bait-and-switch pricing – the number we email you is the number we invoice you.

Is financing available? Yes. We offer 0% APR financing on equipment purchases through First Business Bank and can pull that number into the quote alongside cash pricing. The financing lead form is on our main store and we can walk you through it on the call.

How long from order to install? Equipment usually ships from the BendPak factory within about a week of the order clearing. Install we schedule around the ship date so the lift arrives and gets installed in one window. For a common model like the XPR-10AS you are usually running lifts inside three to four weeks from the day you say yes.

Can you install a BendPak lift we already bought somewhere else? In most cases yes, though we will inspect the crate first and confirm nothing is missing. Bring the shipment paperwork.

What about a BendPak 4 post lift instead? Different page, different quote. Call and we will get you pricing on a BendPak 4 post lift the same way.

Frequently asked questions

Why do you quote BendPak 2 post lifts instead of listing them?

BendPak is a fine brand but our first-recommendation 2 post lifts are Rotary, Forward, and Challenger. We source BendPak by quote so buyers who specifically want that brand get their exact model priced with the options they need.

Which BendPak 2 post lift models do you quote most?

XPR-10AS (10K asymmetric), XPR-10S, XPR-12CL clearfloor, XPR-15CL, HDS-14LSX, HDS-18E, and HDS-27 for heavy-duty. Any current BendPak 2-post model we can quote.

Do you install BendPak lifts?

Yes. Central Iowa is our home service zone. Outside that zone we can either drop-ship to your address or quote per-mile for install.

How long from BendPak order to install?

Equipment usually ships from the BendPak factory within a week of order clearing. Install schedules around delivery. Plan on three to four weeks total for common XPR models.

Do you handle BendPak warranty claims?

Yes. BendPak warranties the lift directly but we help file claims and coordinate service. We do not disappear once the invoice is paid.