Once you have secured the power side column, proceed to work on the offside column. This step will be simpler and more efficient. Follow the installation steps again for the second column.

After both columns are secured, move on to install the Top Trough Assembly. This is a straightforward task. You will likely need a forklift to lift the bar, though you can also use two ladders with two people on each side. Once the bar is positioned on top, ensure you tighten the bolts. This will complete the structure and the most challenging part of the lift. Check that the anchor bolts haven’t loosened while tightening the top bar, and tighten them if necessary.

Next, install the Car Lift For Sale hydraulic power unit. Despite its weight, it can be managed with help. After installing the hydraulic unit, fill it with approximately four gallons of hydraulic oil.

 Installing Cables, Lines, and Hoses

The next step involves installing the safeties, safety cables, hydraulic lines, power unit hoses, and routing the equalizer cables.

The Car Lift For Sale installation process can vary depending on the type of lift you have. Typically, safety cables need to be threaded through the cylinders in the columns and the top bar of the lift. The same applies to the hydraulic lines and power unit hoses. Refer to the installation manual for precise instructions on where and how to install each cable. Since you are no longer handling heavy lifting, the process should be more manageable, but attention to detail is crucial. A mistake here could require you to redo your work.

 Installing the Car Lift For Sale Lift Arms

Lastly, install the lift arms, which is usually a straightforward procedure. Position the lift arms correctly and insert the headpins.

Ensure that the Arm Restraint Gears are properly positioned and adjusted, and that each lift arm is correctly aligned. Check that the gears are functioning properly before operating the lift. Regular inspection of the gears is essential, as improper installation can pose a significant safety hazard in your repair shop.

Ensure that the teeth on the gear ring properly mesh with those on the arm restraint gears. Additionally, tighten the bolts on the gear ring. Test the lift arm by moving it from left to right to confirm it can support your weight before placing any cars on it.

Adjust the Car Lift For Sale gear ring on the arm as needed to ensure smooth operation and proper engagement of all four Arm Restraint Pin Assemblies with the Arm Restraint Gear Ring.  Follow this manual thoroughly and refer to the car lift’s accompanying manual for detailed instructions. With these resources, you should be able to install the lift yourself in just a few hours. It’s a relatively straightforward process.

 Automotive Lift Installation Guide: DIY or Professional?

Congratulations on purchasing a Car Lift For Sale automotive lift! It’s a valuable tool for any auto repair enthusiast, but you might be wondering whether you can install it yourself. If you’re wondering if it’s a one-person job, the answer is no. You’ll need at least one friend—and possibly more—to help maneuver the lift off the delivery vehicle and position it correctly.

While it’s feasible to install an automotive lift on your own without hiring a professional, the task comes with risks and potential challenges that might make you reconsider. However, with careful planning, it can certainly be done.

 DIY Installation

With the right tools and sufficient manpower, a capable DIYer can manage the installation. Keep in mind that installing a vehicle hoist can be hazardous. The lift will be supporting a car, so improper installation could lead to injuries or property damage. Ensure you have the necessary tools, equipment, and assistance before starting a DIY installation.

Advantages:

– Cost Savings: Professional installers typically charge $400 to $500 for a two-post lift and $600 or more for a four-post lift. By doing it yourself, you can save that money for other tools or garage upgrades.

– Flexibility: You can schedule the installation at your convenience without having to coordinate with technician availability.

– Personal Fulfillment: If you enjoy DIY projects, successfully installing the lift can be a rewarding experience, giving you a sense of accomplishment and confidence.

Disadvantages:

– Concrete Reinforcement: You may need to reinforce the concrete under the lift posts and consider the lift’s placement in your garage to ensure adequate ceiling clearance and accessibility.

– Inadequate Tools: If you don’t have the right tools, you may need to purchase or rent them. For example, renting a forklift to unload the lift can cost over $100 per day.

– Damage Risks: There’s a risk of damaging the lift or your vehicle if the installation isn’t done correctly. Some manufacturers may void the warranty if the installation is improper.

– Injury Risk: Handling heavy equipment and working under an improperly installed lift can lead to injuries.

– Project Delays: Even if you manage to complete the installation, it might take longer than expected due to unforeseen issues.

Ultimately, while DIY installation is possible and can be cost-effective, it requires careful consideration of the risks and challenges involved.

 Professional Installations

Even if you have the capability and tools for an automotive lift installation, there are compelling reasons to consider hiring a Car Lift For Sale professional team.

Car Lift For Sale Advantages:

– Experience: Professionals who have installed hundreds or thousands of automotive lifts are well-versed in potential issues and how to address them. They can advise on the best location for the lift and handle any necessary concrete reinforcement. Problems that might stump a DIYer are often just minor hurdles for experienced installers.

– Learning Opportunity: You have the chance to observe the professionals in action and ask questions about their process. They can offer valuable insights into lift maintenance and operation.

– Warranty Assurance: A professional team will test the lift to ensure it functions properly and is free from defects. They will handle any installation issues that arise, maintaining your warranty and relieving you of responsibility for fixing problems.

– Peace of Mind: With a reputable installation team, you can trust that the job will be done correctly and efficiently, without you needing to worry about the details or timeline.