Servicing a Challenger EV1020 and looking for parts? We stock the wear items and the hard-to-find pieces for this in-ground, and we map every one of them on a visual parts breakdown so you can see exactly which item you need before you order. Here is what to know when buying challenger ev1020 parts, and where to see every part mapped visually.
See the full challenger ev1020 parts breakdown, mapped visually
The fastest way to find the right part: open the Challenger EV1020 parts breakdown – it shows the manufacturer-style exploded drawing with every item numbered, matched to a parts table with 29 orderable parts. Find your part on the drawing, click it in the table, and it goes straight to a cart. It is the same parts-book layout our own techs use in the field, so what you see is what we would look at on the phone with you.
What we stock for the challenger ev1020 parts
The most-requested items: 2 x 68 Hydraulic RAM Cylinder (EV1020/EV1220) (16138R), Cylinder Sleeve (EV1020/EV1220) (16425), Adapter Rack (12071), Foot Pad Assembly (items 1A-1F) (B2270), and Foot Pad Weld (B12163S). Those are the headline parts – the full set of 29 orderable items lives on the visual breakdown.
How to identify the right part
The trickiest part of buying challenger ev1020 parts is confirming the correct SKU for your specific configuration. The same lift model across different production years or height variants can take different cables, arms, or sheaves. Check the data plate on the column for the full model string and serial before ordering – or open the breakdown above and match your part against the drawing. When in doubt, call with the plate photo and we confirm before we ship.
Cross-reference part numbers
A lot of challenger ev1020 parts carries more than one part number – the manufacturer’s original plus one or more aftermarket references. We keep those cross-references, so a call with any of the numbers gets you to the right part. If you have an old invoice with a legacy SKU on it, we can trace it forward to the current equivalent.
Install and safety notes
Cables, sheaves, and lock components on any challenger ev1020 parts are safety-critical. Replace cables at the manufacturer’s interval or when you see fraying, kinks, or corrosion – never wait for a failure. Sheaves wear alongside cables and should be inspected in the same service. Locks that do not click cleanly are a hard stop: do not use the lift until they are fixed. Unsure whether a part is still safe? Send a photo rather than guess.
Buy the challenger ev1020 parts from a crew that services these lifts
The reason to buy challenger ev1020 parts from us instead of a marketplace: we install and repair these lifts for a living. That means knowing which parts commonly fail together, which cross-references actually fit, and which knock-offs to avoid. When you call mid-install with a question, the phone gets answered by people who have done the job.
Delivery, install, and service
Most challenger ev1020 parts ships within a few days of ordering. For local Iowa customers we install parts on site or bring the lift in; for everyone else we ship, answer technical questions on the phone, and coordinate service where it makes sense. Open the EV1020 breakdown any time to see the drawing again, or start at our parts lookup and pick your manufacturer and model.
Get the right part
The clean way to buy challenger ev1020 parts: open the visual breakdown, find your part on the drawing, and order it right there – or call 800-674-9302 with your lift’s model plate and serial and we will confirm the right SKU before anything ships. We would rather ask the questions now than see a returned box next week.
Where we work
We are based in Iowa and support shops across the country. Some work we do on site regionally; for the rest of the U.S. we handle equipment, parts, and phone diagnosis, and we coordinate service calls where it makes sense. Call and we will tell you honestly what we can do for your location.
We would rather give you a straight answer than overpromise a truck roll that does not make sense. Tell us where you are and what you need.
Challenger Ev1020 Parts – FAQ
How fast do parts ship?
Most in-stock parts ship within a couple business days. If the shop is down, tell us – rush options exist for most items.
Can you install the part on my lift?
For Iowa shops, yes – on site or in our shop. For everyone else we ship the part and support the install by phone.
How do I know which specific part I need?
Open the visual parts breakdown for your model – every part is numbered on the drawing and matched to an orderable SKU in the table. Or call with your lift's model plate and serial and we confirm before shipping.
Do you carry cross-references from other suppliers?
Yes. Most lift parts carry multiple part numbers. We match legacy or aftermarket SKUs to the current equivalent.
Need challenger ev1020 parts? Open the visual parts breakdown to see every part mapped on the drawing, or call 800-674-9302 with your lift’s model plate and we will confirm the right part and ship it fast.
Related services
Josiah Ragsdale
Founder, Automotive Lift Services
Josiah has installed, repaired, and inspected automotive lifts and hydraulic equipment since he was 18. He founded Automotive Lift Services in Iowa, and his team now serves shops, dealerships, and fleets across the state and nationwide. Read more
Challenger EV1020 specifications (from the install manual)
- Capacity: 10,000 lbs (2,500 lbs per arm); hydraulic pressure at capacity 2550 psi
- Rise height (screw pads at highest position): 74″
- Overall width / drive-thru: 110 1/4″ wide, 83 1/2″ drive-thru
- Lifting time: about 38 seconds
- Electrical: 2HP, 230V single phase 60Hz (optional 2HP three phase, 240V or 480V); the motor must be mounted at least 18″ above finished floor level per NEC NFPA 70
- Concrete requirement: 3500 psi steel-reinforced concrete tied into the existing floor with rebar; floor sloped away from the lift for drainage at no more than 1/16″ per foot; do not use the lift until the pour has fully cured to 3500 psi
- Air supply: clean, dry, lubricated air regulated to 90-120 psi through an FRL within 30 ft of the factory air valve
- Hydraulic fluid: 12 quarts of 10wt Dexron III ATF
Install notes from the manual
The containment assembly is supported on 6×6 timbers and 1/2″-13 x 18″ threaded rods during the pour, with the concrete tie anchors bent out 90 degrees and down 45 degrees before concrete goes in; finish the concrete to the edge of the ties, 3/16″ below their tops. Once the floor sets, pull the timbers and rods, replace the cover bolts, and torque them to 60 ft-lbs. Bolt the pad bolsters to the pistons with the 7/8″-9 x 3 1/2″ cap screws torqued to 120 ft-lbs, and put anti-seize on the arm pins, foot pad retaining rings, and screw contact faces. With the lift down, arms fully extended, and pads at their lowest, check that the foot pad screws clear the floor — adjust the bolster height bolt, and remove it if there is more than 3/8″ clearance on both screws. Do not bypass the factory in-line air filter, and if the lift stops short of full rise or chatters, check fluid level and bleed both cylinders.
Source: the manufacturer’s installation and operation manual for the EV1020. Call 800-674-9302 if you need the full manual for your production year.
Our Clients Include: