The most common type of surface-mounted lift in the United States is the two-post, drive-through, frame-engaging model. This lift consists of two lifting carriages, each of which supports two swing arms. The carriages are synchronized to move together in a way that keeps them level and aligned, ensuring a smooth and stable lifting process. To achieve this synchronization, a variety of mechanisms may be employed, such as steel cables, chains, synchronized motors, or hydraulic circuits. In the United States, steel cables are the most commonly used synchronization method. These cables ensure that both carriages move in unison, providing a balanced and controlled lift. This mechanism ensures the lift remains stable and effective, even when lifting heavier vehicles, making it a reliable option for automotive professionals.
The Mobile Column Lift For Sale Casas Adobes AZt Lift offers numerous advantages, especially in terms of safety, accessibility, and ease of use. Additionally, surface-mounted two-post lifts offer practicality, portability, and environmental benefits, making them a popular choice for businesses. The combination of ease of installation, simple maintenance, and environmental safety makes surface-mounted lifts a sensible option for shops and repair facilities, ensuring that vehicles can be lifted and serviced with efficiency and minimal risk.
To the right of the Mobile Column Lift For Sale Casas Adobes AZ hydraulic cylinder, you can see the steel synchronization cable and pulley system. These components play a crucial role in ensuring the proper operation of the lift system, particularly in synchronizing the movement of the hydraulic cylinders. The synchronization mechanism is integral to the lift’s design, as it ensures that both columns of the lift raise and lower at the same rate, helping to keep the vehicle level during the lifting process.
The synchronization cables and their associated components are connected to each post of the lift in one of two possible ways: they may either be routed through an overhead beam that spans across the posts or run underneath a floor plate cover. The design choice between these two options typically depends on the height of the ceiling in the space where the lift is being installed. The overhead beam style is often preferred in environments with higher ceiling heights, as it requires a minimum ceiling clearance of approximately twelve feet. This configuration has the added benefit of leaving the space between the lift columns unobstructed, making it easier for workers or technicians to move around the lift and the vehicle being serviced.
On the other hand, the Mobile Column Lift For Sale Casas Adobes AZ floor plate style of installation is generally chosen in situations where the ceiling height is lower, typically under ten feet. In this design, the cables and other components are routed through a plate that covers the floor, making it more suitable for confined spaces with limited ceiling clearance. This arrangement allows the lift to function properly while accommodating spaces with lower ceiling heights, which are commonly found in older buildings or smaller workshops.
It’s important to note that while the synchronization cables themselves are essential for proper functioning, they do not carry the load of the vehicle being lifted. Instead, their primary role is to equalize the Mobile Column Lift For Sale Casas Adobes AZ hydraulic cylinders, ensuring that both lift arms and carriages move in unison, raising and lowering the vehicle evenly. The hydraulic cylinders themselves, along with the carriages and lift arms, bear the weight of the vehicle during the lifting process. By adjusting the synchronization cables, technicians can ensure that the safety locks within each column of the lift are able to engage properly and at the same time, providing an added layer of security during the lift operation.
The hydraulic system that powers the lift is composed of several key components, including the electric power unit, hydraulic hoses, and the two hydraulic cylinders, one in each of the lift’s columns. The electric power unit is a combined unit that includes the electric motor, hydraulic pump, and reservoir tank, all integrated into a single assembly. This configuration helps to streamline the operation of the lift and makes it more efficient by reducing the number of separate components required.
The electric motor that powers the Mobile Column Lift For Sale Casas Adobes AZ hydraulic pump requires a 220-volt power supply, typically connected to a 30-amp circuit. Many shops opt to route the electrical power from the ceiling to the motor switch box, which ensures that the electrical connections are safe and comply with local electrical codes. The hydraulic pump, which is positioned between the motor and the reservoir tank, plays a vital role in the lift’s operation. It is equipped with valves that are set to specific pressure limits in order to prevent the system from lifting beyond its rated capacity. It is crucial to emphasize that the factory settings for these pressure valves should not be adjusted under any circumstances, as altering these settings could lead to unsafe lifting conditions or damage to the system.
When the operator presses the up button on the lift’s control panel, the hydraulic fluid is pressurized by the pump and sent through the hoses to the hydraulic cylinders. This pressurized fluid causes the carriages and lift arms to rise, lifting the vehicle off the ground. Conversely, when the down button is pressed, the Mobile Column Lift For Sale Casas Adobes AZ hydraulic fluid is allowed to return to the reservoir tank via a lowering valve, which ensures that the lift is lowered safely and gradually. This lowering mechanism is just as important as the lifting function, as it ensures that the vehicle is safely lowered without any sudden or uncontrolled movements.
The hoses and cables that are part of the lift’s Mobile Column Lift For Sale Casas Adobes AZ hydraulic system are routed to each post in one of two ways, depending on the style of the lift being used. In the overhead beam configuration, the hoses and cables are routed above the lift, across the beam that connects the lift posts. This setup is commonly found in environments where there is ample ceiling space. In contrast, the floor plate design routes the cables and hoses beneath the lift, under a protective floor cover, which is ideal for environments with lower ceilings.
Our Clients Include: